Spaun FSW 5 F 871315 Merkblatt
Produktcode
871315
Byk-Gulden-Str
. 22 · D-78224 Singen
Phone: +49 (0) 7731 - 8673-0 · Fax: +49 (0) 7731 - 8673-17
Email: contact@spaun.com · www
.spaun.com
Specifications and design are subject to change due to our policy of continual technical improvement. 104014/12.12
Technical Advice for the products
SMF 790, FSW 5, FSW 30 F, FSW 40 F, SEW 121 F, SEW 122 F, SEW 123 F
Important: please observe the following instrucitions.
The equipment described is designed solely for use in installtion of satellite and CATV systems.
Any other use, or failure to comply with these instructions, will result in voiding of warranty
cover.
SPAUN electronic confirms the keeping of the EMC requirements in accordance to the
EU product norm EN 50083-2 and the keeping of the safety requirements in accordance to the
EU product norm EN 60728-11 by the CE sign.
The permissible ambient temperature range is: -20° C ... +50° C.
The equipment described is designed solely for use in installtion of satellite and CATV systems.
Any other use, or failure to comply with these instructions, will result in voiding of warranty
cover.
SPAUN electronic confirms the keeping of the EMC requirements in accordance to the
EU product norm EN 50083-2 and the keeping of the safety requirements in accordance to the
EU product norm EN 60728-11 by the CE sign.
The permissible ambient temperature range is: -20° C ... +50° C.
Electrical and electronic equipment
are not household waste - in accordance with the
European directive EN 50419 (corresponds to the article 11(2) of the guideline 2002/96/EC) of
the European Parliament and the Council of January, 27th 2003 on used electrical and electro-
nic equipment, it should be disposed properly. Please, on the end of its life cycle, take this unit
and dispose it on designated public cleection points.
the European Parliament and the Council of January, 27th 2003 on used electrical and electro-
nic equipment, it should be disposed properly. Please, on the end of its life cycle, take this unit
and dispose it on designated public cleection points.
SMF 790 (Art.Nr. 871304) LTE Stop Band Filter
The SMF 790 is needed to block the LTE signals above 790 MHz. The prevents that LTE signals
pass the terrestrial range below 790 MHz and interfere the reception of such as DVB-T.
The SMF 790 is needed to block the LTE signals above 790 MHz. The prevents that LTE signals
pass the terrestrial range below 790 MHz and interfere the reception of such as DVB-T.
Through band
5 ... 790 MHz Stop band
822 … 1000 MHz
Through loss
typ. 1 dB
Selektion
typ. 50 dB
FSW 5 (Art.Nr. 871315) Line Power Injection Filter
FSW 30 F (Art.Nr. 815018) Line Power Injection Filter
FSW 40 F (Art.Nr. 815018) Line Power Injection Filter
To combine or separate IF-signal and remote power.
FSW 30 F (Art.Nr. 815018) Line Power Injection Filter
FSW 40 F (Art.Nr. 815018) Line Power Injection Filter
To combine or separate IF-signal and remote power.
Model
FSW 5
FSW 30 F
FSW 40 F
Frequency range
5 ... 2200 MHz
5 ... 2200 MHz
5 ... 2200 MHz
Through loss
1 dB
1 dB
1 dB
DC-pass max.
1 A
1 A
1 A
Remote power voltage max.
30 V
30 V
20 V
SEW 121 F (Art.Nr. 871108) Diplexer
SEW 122 F (Art.Nr. 871439) Diplexer
SEW 123 F (Art.Nr. 871109) Diplexer
To combine or separate the terrestrial and SAT IF signals.
DC-pass for LNB remote power.
SEW 122 F (Art.Nr. 871439) Diplexer
SEW 123 F (Art.Nr. 871109) Diplexer
To combine or separate the terrestrial and SAT IF signals.
DC-pass for LNB remote power.
Model
SEW 121 F
SEW 122 F
SEW 123 F
Frequency range
5 ... 862 MHz
950 ... 2200 MHz
5 ... 160 MHz
250 ... 2200 MHz
5 ... 862 MHz
950 ... 2200 MHz
Through loss SAT
Terr.
Terr.
1,5 dB
2,5 ... 1,5 dB
2 ... 1 dB
0,5 ... 2 dB
1,5 dB
0,5 ... 2 dB
Selektion Terr./SAT
SAT/Terr.
SAT/Terr.
> 32 dB
> 32 dB
> 32 dB
> 40 dB
> 40 dB
> 40 dB
> 30 dB
> 30 dB
> 30 dB
DC-pass max.
20 V / 1 A
20 V / 1 A
20 V / 1 A