Philips Vacuum cleaner with bag FC8606/02 FC8606/02 Benutzerhandbuch

 2 

 To disconnect the tube parts from each other and from the handgrip of the hose, pull while 

turning a little.
Button coupling (specific types only)

 1 

 To connect the tube to the handgrip of the hose, press the spring-loaded lock button on the 

handgrip and insert the handgrip into the tube. Fit the spring-loaded lock button into the 

opening in the tube (‘click’) (Fig. 4).

 2 

 To disconnect the tube from the handgrip of the hose, press the spring-loaded lock button 

and pull the handgrip out of the tube.

 1 

Adjust the tube to the length you find most comfortable during vacuum cleaning (Fig. 5).

The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors.

 - The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean 

better along furniture and other obstacles (Fig. 6).

 - The opening at the front of the nozzle allows you to suck up larger particles (Fig. 7).

 1 

To clean hard floors, push the rocker switch on top of the nozzle with your foot (Fig. 8).

 

, The brush strip for cleaning hard floors comes out of the housing. At the same time, the

wheel is lifted to prevent scratching and to increase manoeuvrability.

 2 

 To clean carpets, push the rocker switch again (Fig. 9).

 

, The brush strip disappears into the nozzle housing and the wheel is lowered automatically.

The combination nozzle can be used on either carpets or hard floors.

 1 

To clean hard floors, push the rocker switch on top of the nozzle with your foot (Fig. 10).

 

, The brush strip for cleaning hard floors comes out of the nozzle housing.

 2 

 To clean carpets, push the rocker switch again (Fig. 11).

 

, The brush strip disappears into the nozzle housing.

 1 

Connect the crevice tool (1) or small nozzle (2) directly to the handgrip or to the tube

(Fig. 12).
Accessory clip

 1 

 Snap the accessory clip onto the tube (Fig. 13).

 2 

Snap the crevice tool and the small nozzle onto the clip.

 1 

 Pull the cord out of the appliance and put the mains plug in the wall socket.

 2 

 Press the on/off button on top of the appliance with your foot to switch on the appliance  

(Fig. 14).

 3 

During vacuum cleaning, you can adjust the suction power with:

 - the slide on the handgrip (specific types only) (Fig. 15)

 - the knob on top of the appliance (specific types only) (Fig. 16)

7