Sony Micro Hi-Fi System NAS50HDE Benutzerhandbuch

NAS-50HDE.GB.2-890-157-11(1)

 If you experience noise in an FM stereo broadcast, 

enter the Option menu and select [Setting] – [FM 

mode] – [Monaural]. The reception will no longer 

be stereo, but it will be clearer. To change back to 

stereo reception, do the same procedure and select 

[Auto stereo].

 For better broadcast reception, try changing the 

direction or location of the antenna. For example, 

position the antenna near or outside a window. If 

the reception does not improve, it is recommended 

to connect a commercially available external 

antenna.

Before you can receive DAB services, 

the broadcast components (service 

components) must first be registered 

by conducting a DAB Auto Scan (see 

“Performing DAB Auto Scan” on page 23).
Press DAB, or enter the Function menu 

and select [DAB].
The DAB main display appears and the 

unit starts receiving the services.

Select different 

services

Press / repeatedly 

to select the desired service.
Press  to display the 

service component list, press 

/ to select the desired 

service, and then press 

ENTER.
Press the corresponding 

numeric button to select the 

service number (or preset 

number) of the desired 

service.

Switch between 

the primary 

and secondary 

components

Press /.

Switch between 

“auto tuning” 

and “preset 

tuning”*

Enter the Option menu and 

select [Mode switch].

*  When you switch from “auto tuning” to “preset 

tuning”:

  The unit changes to the preset tuning display 

and begins receiving the service for the last 

preset number used.

 “No preset” appears in the preset tuning display 

if the last preset number used was cleared.

Name of service

Service Label and frequency

Dynamic Label Segment

Ensemble Label

Service number