Homexpert By Honeywell Thermostat head 5 up to 30 °C Rondostat HR30 HR30 Benutzerhandbuch

- 3 -

Selecting the adapter

The radiator controller fits on the most common radiator 
valves M30 x 1.5. Adapters are required for some valve 
types.

1. Check whether an adapter is required and, if 

necessary, select the appropriate adapter.

Make

Illustration

adapter

Valves M30 x 
1.5 Honeywell-
Braukmann, 
MNG, Heimeier, 
Oventrop

Not 

required

Danfoss RA

Supplied

Danfoss RAV

Supplied

Danfoss RAVL

Supplied

2. Slide the adapter onto the radiator valve and turn it 

until you feel it click into place.

3. If necessary, screw the adapter tight with a screw. 

Mounting the valve baseplate

1. Separate the valve baseplate from the radiator 

controller. To do so, slide the slide towards the 

.

2. Turn the adjustment dial of the valve baseplate anti-

clockwise until it stops.

3. Put the valve baseplate onto the radiator valve or the 

adapter and tighten by hand (without tools!).

Mounting the radiator controller

1. Ensure that the slide at the radiator controller is in the 

open position.

2. Push the radiator controller onto the valve baseplate 

so that the geer teeth catch and are no longer visible.

3. Lock the radiator controller in the end position. To do 

so, slide the slide towards the  .
The radiator controller carries out a self test and after 
1 minute displays 

cycl

i

The radiator controller only functions if it is 
interlocked in the end position.

FINISHED! – Your radiator controller is now ready for 
operation with the factory setting!

Securing controller and battery compartment

i

The radiator controller and battery compartment 
can be secured against being removed or opened by 
means of a screw. These screws are not included in 
the packaging.

Countersunk screws  
Torx/corss recess 2.2x8mm 
Type: WIN1412-KC22X8-Z or 
WIN1412-KB22X8-Z