Samsung LE-37M86BX/XEC/KIT Benutzerhandbuch

1.  Press the anynet+ button. 

Press the ▲ or ▼ button to select 

receiver, then press the 

enter/oK button.

2.  Press the ◄ or ► button to select to on, then press the 

enter/oK button. 

Now you can listen to sound through the receiver.

.  Press the exIt button to exit. 

When the receiver is set to On, you can listen to the TV sound 

through the 2-channel receiver.

If the receiver is exclusively for a home theater only (supporting 

audio only), it may not appear in the device list.

Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.

In case of a content with copyright problem, listening through the receiver may not properly operate.

When listening through the receiver, there are restrictions for using the PIP and audio-related menu.

➣

➣

➣

➣

➣

■  Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ 

devices only.

■  Connect only one receiver.

■  Check if the Anynet+ device power cord is properly connected.

■  Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.

■  Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

■  Check whether the TV remote control is in TV mode.

■  Check whether it is Anynet+ exclusive remote control.

■  Anynet+ doesn’t work at a certain condition. (Searching channels)

■  When connecting or removing the HDMI 1.3 cable, please make sure to search 

devices again or restart your TV.

■  Check if the Anynet+ Function of Anynet+ device is set on.

■  Check if the Anynet+ device is properly connected to the TV and check if the 

Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.

■  Press the 

tV button on the TV remote control to switch to TV. Then press the 

Anynet+ button to show the 

anynet+ menu and select a menu you want.

I want to exit anynet+. ■  Select View tV in Anynet+ menu. 

■  Press the 

SourCe button on the TV remote control and select a device other 

than Anynet+ devices.

■  Press any of 

Ch, Ch lISt, Pre-Ch, and such to change to the  

TV mode. (Note that the channel button operates only when a tuner-embedded 

Anynet+ device is not connected.)

■  You cannot use the remote control when you are configuring Anynet+ or 

switching to a view mode.

■  Use the remote control when the Anynet+ setting or switching to view mode is 

complete.

You cannot use the play function when Plug & Play is in progress.

■  Check whether or not the device supports Anynet+ functions. 

■  Check whether or not the HDMI 1.3 cable is properly connected.

■  Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

■  Search Anynet+ devices again.

■  You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI 

cables may not support Anynet+ functions.

Check whether the antenna jack on the recording device is properly connected.

Connect the optical cable between TV and the receiver.













BN68-01186B-Eng-0309.indd   58

2007-03-13   �� 9:23:35