E-flite UMX Whipit DLG BNF Basic EFLU3150 Datenbogen
Produktcode
EFLU3150
4
EN
Transmitter Setup
Dual Rates
To obtain the best fl ight performance, we
recommend using a DSM2/DSMX radio capable
of adjustable Dual Rates. The suggested settings
shown here are the recommended starting settings.
Adjust according to the individual preferences after
the initial fl ight.
recommend using a DSM2/DSMX radio capable
of adjustable Dual Rates. The suggested settings
shown here are the recommended starting settings.
Adjust according to the individual preferences after
the initial fl ight.
NOTICE: Do not set your transmitter travel adjust
over 100%. If the TRAVEL ADJUST is set over
100%, it will not result in more control movement, it
will overdrive the servo and cause damage.
over 100%. If the TRAVEL ADJUST is set over
100%, it will not result in more control movement, it
will overdrive the servo and cause damage.
It is normal for linear servos to make signifi cant
noise. The noise is not an indication of a
faulty servo.
noise. The noise is not an indication of a
faulty servo.
Tip: For the fi rst fl ight, fl y the model in low rate.
Dual Rate
High
Low
Elevator
100%
70%
Rudder
100%
70%
Wing Installation
Install the wing on the fuselage using 4 screws.