TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB Datenbogen
Produktcode
TL-SG2216WEB
Choose the menu
Multicast→MLD Snooping→VLAN Config to load the following page.
The following entries are displayed on this screen:
Vlan Config
VLAN ID:
Enter the VLAN ID you want to configure.
Router Port Aging
Time:
Enter the router port aging time for this VLAN. It will override the
global configured aging time.
Member Port Aging
Time:
Enter the member port aging time for this VLAN. It will override
the global configured aging time.
Immediate Leave:
Enable or disable immediate leave function for this VLAN. If this
function is enabled, the multicast group member port will be
deleted immediately if Done Message receive, not sending
Specific Query for listener checking.
Static Router Ports:
Enter the static router ports for this VLAN. Static router ports will
not be aged.
Vlan Table
Select:
Select the VLAN ID you want to change.
VLAN ID:
Displays the VLAN ID.
Router Port Aging
Time:
Displays the router port aging time of this VLAN.
Member Port Aging
Time:
Displays the member port aging time of this VLAN.
Immediate Leave:
Displays the immediate leave function of this VLAN. You should
only use the Immediate-Leave feature when there is a single
receiver present on every port in the VLAN. If the immediate
leave function is enabled on a port with several listeners in the
same IPv6 multicast group, these listeners will fail to receive the
IPv6 multicast packets after one of them leave this group.
Static Router Ports:
Displays the static router ports of this VLAN.
111