Sony Home Theatre and Hi-Fi CMT-EH25 CMT-EH25 Benutzerhandbuch
Produktcode
CMT-EH25
CMT-EH26/EH25.GB.3-874-279-51(1)
11
GB
G
etting S
tar
ted
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
Speakers
Insert only the stripped portion of the
speaker cords into the SPEAKER jacks.
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
To use the remote
Slide and remove the battery
compartment lid
, and insert the two
R6 (size AA) batteries (not supplied),
side first, matching the polarities shown
below.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /
to turn on the
system.
2
Press CLOCK/TIMER SET
.
The hour indication flashes in the
display.
If “PLAY SET” flashes in the display,
press /
repeatedly to
select “CLOCK” and then press
ENTER
.
3
Press /
repeatedly
to set the hour, and then press
ENTER
ENTER
.
4
Use the same procedure to set
the minutes.
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . The clock is
displayed for about 8 seconds.