Samsung BN59-01012A Datenbogen

The power output of the wireless device or devices that may be embedded in 

your printer is well below the RF exposure limits as known at this time. Because 

the wireless devices (which may be embedded into your printer) emit less 

energy than is allowed in radio frequency safety standards and 

recommendations, manufacturer believes these devices are safe for use. 

Regardless of the power levels, care should be taken to minimize human contact 

during normal operation.

As a general guideline, a separation of 20 cm (8 inches) between the wireless 

device and the body, for use of a wireless device near the body (this does not 

include extremities) is typical. This device should be used more than 20 cm (8 

inches) from the body when wireless devices are on and transmitting.

This transmitter must not be collocated or operation in conjunction with any 

other antenna or transmitter.

Some circumstances require restrictions on wireless devices. Examples of 

common restrictions are listed below:

Radio frequency wireless communication can interfere with 
equipment on commercial aircraft. Current aviation regulations 
require wireless devices to be turned off while traveling in an airplane. 
IEEE 802.11 (also known as wireless Ethernet) and Bluetooth 
communication devices are examples of devices that provide wireless 
communication.

In environments where the risk of interference to other devices or 
services is harmful or perceived as harmful, the option to use a wireless 
device may be restricted or eliminated. Airports, Hospitals, and 
Oxygen or flammable gas laden atmospheres are limited examples 
where use of wireless devices may be restricted or eliminated. When in 
environments where you are uncertain of the sanction to use wireless 
devices, ask the applicable authority for authorization prior to use or 
turning on the wireless device.

Every country has different restrictions on the use of wireless devices. 
Since your system is equipped with a wireless device, when traveling 
between countries with your system, check with the local Radio 
Approval authorities prior to any move or trip for any restrictions on 
the use of a wireless device in the destination country.

If your system came equipped with an internal embedded wireless 
device, do not operate the wireless device unless all covers and shields 
are in place and the system is fully assembled.

Wireless devices are not user serviceable. Do not modify them in any 
way. Modification to a wireless device will void the authorization to 
use it. Contact manufacturer for service.

Only use drivers approved for the country in which the device will be 
used. See the manufacturer System Restoration Kit, or contact 
manufacturer Technical Support for additional information.