Sony BDV-N5200W BDVN5200WB Datenbogen

47

GB

BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W

4-485-800-13(1)

D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200 
(PMRF 02)\4485800131_GB (CEK)\080OTH.fm

masterpage:

Right

5

Press V/v to select setting 
according to your speakers 
placement, then press 

• [Standard]: The surround 

speakers are installed in the rear 
position.

• [All Front]: All speakers are 

installed in the front position.

The confirmation display for [Auto 
Calibration] appears.

6

Connect the calibration mic to the 
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear 
level using a tripod, etc. (not 
supplied). The calibration mic 
should aim the TV screen. The front 
of each speaker should face the 
calibration mic, and there should be 
no obstruction between the 
speakers and the calibration mic.

7

Press V/v to select [OK].
To cancel, select [Cancel].

8

Press .
[Auto Calibration] starts.
The system adjusts the speaker 
settings automatically.
Be quiet during the measurement.

While [Auto Calibration] is in progress, 
do not operate the system.

9

Confirm the result of [Auto 
Calibration].
The distance and level for each 
speaker appear on the TV screen.

• If measurement fails, follow the 

message then retry [Auto 
Calibration].

• If no center speaker is detected, the 

[Centre Speaker] will be 
automatically set to [Off].

10

Press V/v to select [OK] or 
[Cancel], then press 

x

Disconnect the calibration mic, then 
select [OK]. The result is 
implemented.

x

Follow the message, then select 
[OK] to retry.

Setting the Speakers

To obtain optimum surround sound, set 
the speakers’ distance from your 
listening position.

1

Press HOME.
The home menu appears on the TV 
screen.

2

Press B/b to select 

3

Press V/v to select [Audio 
Settings], then press 

4

Press V/v to select [Speaker 
Settings], then press 

The [Select speaker layout.] display 
appears.

5

Press V/v to select setting 
according to your speakers 
placement, then press 

• [Standard]: The surround 

speakers are installed in the rear 
position.

• [All Front]: All speakers are 

installed in the front position.

All settings are reset to default 
settings each time you change the 
speaker layout setting.