Eurochron EDT 9000 Digital Timer KW-9161 Datenbogen

This timer has 3 countdown functions and one stopwatch function. In addition, the 
timer can be used as watch.

On the back, the timer has a magnet for attaching it to metal surfaces. Of course, 
the timer can also be used standing. For this purpose, there is a foldable stand on 
the back of the housing. There is also a wall hanger, to complete the timer's wide 
spectrum of use.

It is powered by 2 x 1.5V micro batteries (type: AAA).

The product is only approved for use in dry indoor locations.

Any use other than that described above is not permitted and may harm the product 
and result in short circuits, fi re, etc. The product must not be modifi ed or converted. 
Always observe the safety instructions included in these operating instructions. 
Read the operating instructions carefully and keep them for later reference.

   This symbol, with an exclamation mark in a triangle, indicates particular dan-

gers associated with handling, function or operation.

 

The "Hand" symbol indicates special tips and operating information.

   The warranty will be void in the event of damage caused by failure to 

 

 

   The product must not be modifi ed or converted, as not only the CE approval 

will become void but also the warranty will be void. 

 

   After rapid changes in temperature, the product requires some time to stabi-

lise, in order to adjust to the ambient temperature, before it can be used. Wait 
until the product has had time to adjust to the ambient temperature. Water 
condensation could form, which may cause damage to the product.

 

   Electronic devices are not toys and should be kept out of the reach of chil-

dren! 

 

   Please contact qualifi ed personnel, if you are unsure about the safety or the 

correct use of the product. 

 

   Never leave the packaging material lying around unattended. Plastic fi lm/

bags, etc. can be dangerous playthings for children; there is a risk of suffoca-
tion.

 

   If you have a reason to believe that the device can no longer be operated 

safely, disconnect it immediately and secure it against being operated unin-
tentionally.

 

   It can be assumed that safe operation is no longer possible if:

 

 

- the device is visibly damaged,

 

 

- the device does not function any longer and

  - 

 

the device has been stored under unfavourable conditions for a long period 
of time or

 

 

- it has been subjected to considerable stress during transportation.

 

   On industrial sites, the accident prevention regulations of the association of 

the industrial workers' society for electrical equipment and utilities must be 
followed.

 

   The product is only approved for use in dry indoor locations.

 

   It is powered by 2 x 1.5V micro batteries (type: AAA).

 

   Never pour fl uids out above electrical devices. 

 

   Maintenance, adjustment and repair may only be carried out by a qualifi ed 

specialist or a specialised repair shop..

 

   If you have any questions, which are not answered in this manual, please 

contact our technical service or an other specialist. 

  Batteries should be kept out of the reach of children.

   Please pay attention to the correct polarity (plus/+ and minus/-) when inserting 

the batteries.

   Do not leave batteries lying around in the open; there is a risk of them being 

swallowed by children or domestic animals. If swallowed, consult a doctor imme-
diately.

   Leaking or damaged batteries can cause burns if they come into contact with the 

skin. You should therefore wear suitable protective gloves.

   Make sure that the batteries are not short-circuited or thrown into a fi re. There is 

a risk of explosion!

   Do not recharge normal batteries. There is a risk of explosion! 

   If the device is not to be used for a while (e.g. storage), remove the batteries. Old 

batteries can leak and cause damage to the product; loss of guarantee/warranty!

   For the environmentally friendly disposal of batteries and rechargeable batteries, 

please read the chapter “Disposal”.

 

This is used to set the hours

 

 This is used to set the minutes and 
to change the time display format 
between 12h or 24h.

 

This is used to set the seconds

 

   Remove the cover of the "Battery Compartment" (Q).

   Remove the used batteries from the battery compartment.

   Insert two 1.5V micro batteries (type AAA) into the battery compartment. The 

correct polarity is indicated in the battery compartment.

   Replace the "Battery Compartment" cover (Q).

   The product briefl y shows all of the display segments. A short sound confi rms it 

is ready for use.