Sony FWD-S42H1 FWDS42H1 Benutzerhandbuch

 GB

You can show two pictures from different signal sources, such as a PC and a video, side by side.
You can also swap the active pictures, or change the balance of picture sizes.
You can also access the “PAP Setting” in the “Screen” settings. See page 26.

• The cursor indicating the active picture will disappear after 5 seconds.
• The picture can be adjusted to 15 sizes. (For P&P)

The width of A and B is the 
same.
The height will be set to 
match each picture’s 
aspect ratio.

Press 

g button.

The width of B is larger 
than that of A.
If B’s aspect ratio is 4:3, 
its height will be equal to 
the panel size.

The width of A and B is 
the same.
The height will be set to 
match each picture’s 
aspect ratio.

Press 

G button.

The width of A is larger 
than that of B.
If A’s aspect ratio is 
4:3, its height will be 
equal to the panel size.

Press 

g button.

B on the right side 
becomes the active 
picture.

Press 

g button.

B on the right side 
becomes small while 
remaining the active 
picture.

Press 

f button.

The size of the inset picture 
(B) will become large.

Press 

f button.

The size of the inset picture 
(B) will become small.

The inset picture (B) is 
shown within the main 
picture (A).

Press 

G/g button.

The inset picture (B) 
becomes the active 
picture.

Press  

button.

The position of the 
inset picture (B) will 
change.

Press 

F button.