Beko D1 5081 BS Benutzerhandbuch

EN

18

•  Desired auxiliary function depending 

on the program is selected.

•  Some combinations cannot be 

selected together.

•  Warning signal on the selected 

auxiliary function will light up.

Auxiliary function buttons may differ 

according to the model of your machine.

If an auxiliary function that should not 

be selected together with a previously 

selected function is chosen, the first 

selected function will be cancelled and 

the last auxiliary function selection will 

remain active.

Auxiliary function that is not compatible 

with the program cannot be selected. 

(see, “Program Selection Table”)

A pre-wash is only worthwhile for heavily 

soiled laundry. Without pre-wash you 

save energy, water, detergent and time.

C  Pre-wash without detergent is 

recommended for lace and curtains. 

Less detergent should be put in the 

main wash compartment as loose 

knit fabrics (lace) foam too much 

due to its meshed structure.

With this function, you can increase the 

number of current rinsing steps. Thus, 

sensitive skins’ risk of being affected by 

the remainder detergent on the clothes 

will be decreased.

If you do not want to unload your 

clothes immediately after the cotton, 

synthetics, woolen and delicate fabrics 

program, you may release your clothes 

inside the machine in the last rinsing 

water by pressing the rinse hold button 

in order to prevent your clothes become 

wrinkled. After this process you may 

spin your laundry by pressing “Start/

Pause/Cancel” button or you may end 

the program by pressing “Start/Pause/

Cancel” button for 3 sec.

•  In the machines equipped with spin 

speed selection knob or button, you 

can spin by selecting the desired 

spin speed and press "Start/Pause/

Cancel" button.

•  As for machines not equipped with 

a spin speed selection knob, you 

can end the program without a 

spin cycle by pressing the “Start/

Pause/Cancel” button and draining 

the water. If you wish your clothes 

be spun, you can spin them by 

selecting “pump+spin” program. 

You may use the speed reduction button 

whenever you wish to spin your clothes 

below the maximum spin speed. When 

speed reduction button is pressed, spin 

speed will be at the minimum rpm given 

on the panel.

You may use this program if you do not 

want to spin your clothes at the end of 

cottons, synthetics, woolen or delicate 

programs.

If you wish to wash your clothes in cold 

water, you can use this program.

1.  Press "Start/Pause/Cancel" button 

to start the program.

2.  “Start/Pause/Cancel” button will 

light up to indicate that the program 

has started.

3.  The door is locked and the “Lid” 

light fades.

Progress of a running program is shown 

through the program follow-up indicator.

•   At the beginning of every program 

step, the relevant indicator lamp will 

light up and light of the completed 

step will turn off. The symbol that is 

lit up at the far right of the series of 

symbols indicates the step that is 

being carried out.