Westinghouse VK-40F580D Benutzerhandbuch

Ϫ Audio Only

Turn off the LCD backlight and allow the current input’s audio to remain “on” for listening. 

1.  When access AV sub-menu, press arrow keys to 

select Audio Only.

2.  Press arrow keys and Enter button on the 

remote to select ON or OFF.

1.  When access AV sub-menu, press arrow keys to 

select Reset.

2.  Press arrow keys and Enter button on the 

remote to reset the settings.

Once “Channel Scan” is not completed at the stage of “Initial Setup” (see page 22), please ensure to follow 

the below procedures to reach a completion.

1.  When access TV sub-menu, press arrow keys 

and Enter button on the remote control to select 

Scan Channels.

2.  Press arrow keys and Enter button on the 

remote control to select Antenna or Cable scan 

and start to scan channels. 

3.  Once scan process is completed, all scanned 

channels will be stored automatically in the 

system then TV displays the last channel now be 

found.

4. Press Enter button on the remote control to 

finish. 

 Once a PIN was set before, the system will require 

a PIN No. to be entered before perform “Channel 

Scans” function. Please enter “0000” as the default 

PIN setting.