Wegener Communications 6420 Benutzerhandbuch
iPump 6420 User’s Manual
www.wegener.com
800070-01 Rev B
Chapter 1, Page 16
Characteristic
Specification
LAN/WAN Ethernet Ports
Physical Layer LAN &
WAN
WAN
Full-duplex, auto-negotiating 10baseT, 100base TX (twisted
pair) on RJ45 jack
pair) on RJ45 jack
Media Access and Link
Layers
Layers
Per IEEE 802.3 (Ethernet)
Network and Transport
Layers
Layers
Binds to TCP/IP stack
Network Services
Telnet, SMB, FTP, SSH (for diagnostics), HTTP (web)
server, HTTP client (for Return Path)
server, HTTP client (for Return Path)
WAN port security
All inbound TCP connections blocked; inbound ICMP
messages (e.g. PING) blocked
messages (e.g. PING) blocked
Cue Relays
Arrangement
Two banks of 16, each bank may be logically associated with a
main audio output
main audio output
Type
Form A relay 30VDC @ 100mA.
Commons may be wired together (by factory-set jumper), or
each wire pair left “floating”.
Commons may be wired together (by factory-set jumper), or
each wire pair left “floating”.
Alarm/User relay
One relay dedicated to indicate ALARMS and one relay
dedicated to user control. The ALARM relay automatically
de-energizes for alarm conditions so that power loss to unit
indicates as an alarm.
dedicated to user control. The ALARM relay automatically
de-energizes for alarm conditions so that power loss to unit
indicates as an alarm.
Type
Form C, wiper contacts NC contact when de-energized and
NO contact when energized
NO contact when energized
Polarity
Common, NC and NO contacts supplied externally
Rating
30VDC open circuit, 100mA max current closed
RBDS Serial Ports
Arrangement
Two serial ports, each may be logically associated with a main
audio output
audio output
Baud/protocols
Programmable to 1200, 2400, 4800, or 9600 baud, fixed at
8N1; output only
8N1; output only
Serial M&C Port
Assignment
Terminal (default) or Compel email
Baud/protocol-- Terminal
Programmable to 2400, 9600, or 19.2 k baud; fixed at 8N1;
full duplex
full duplex
Baud/protocol—Printer
email
Programmable to 1200, 2400, 4800, or 9600; fixed at 8N1;
output only
output only
PIO Inputs
Physical
7 balanced wire pairs, triggering on closure
Logical
Closures may be programmed to trigger stored Compel cmds