Cavalry Storage CADA-U3E4 Benutzerhandbuch

CADA4-U3E

2

5.

6.

7.
8.

9.

10.

USB

eSATA

ERROR

REBUILD

POWER

HDD 4

HDD 3

HDD 2

HDD 1

EASY YOUR PC

4-BAY RAID HDD Backup Solution

1.

2.

3.

4.

1. Interface LED

2. Power Button

3. HDD Trays (4)

4. HDD Status LEDs

5. Reset/Set Up Button

6. Mode Setting Switch

7. eSATA Connector 

8. USB 3.0 Connector
9. HDD Power Switch

10.  Power DC In

USB 3.0 Cable

Power Supply

1

The tool-less drive-bays are designed to be secure and have as few 

parts as possible. However, accomplishing this requires that the user 

have a strong grasp! To remove the drive bays, pinch the front handle 

firmly until you are able to compress the blue plastic levers inside.

Next pull back slowly until you feel the blue plastic levers clear the 

edge of the case. Now slide the drive bay all the way out of the 

endclosure.

The image to the left shows you the potential drive placement. 

To remove and replace the internal HDD, gently pry the blue retainer 

pins from both sides of the HDD. Set the tray down and continue with 

your swap.

The 

CADA-U3E4

 is designed to be hot-swappable. But if you have 

already setup an active 4-disk array, be careful not to insert any new 

drives. The automatic rebuild function will incorporate any new drives 

into the existing array. That means any existing data on the new drive 

will be wiped clean to accommodate the active array!