Solo USA 280 Benutzerhandbuch

MS 270, MS 270 C, MS 280, MS 280 C

:

Fit the cap - grip upright -marks 
must line up.

:

Turn the cap clockwise as far as 
stop (approx. a quarter turn).

:

Fold the grip flush with the top of the 
cap.

If the grip does not lie completely flush 
with the cap and the detent on the grip 
does not engage the recess in the filler 
neck, the cap is not properly seated and 
tightened and you must repeat the 
above steps.

:

Drain the fuel tank.

:

Use a hook to pull the fuel pickup 
body out of the tank and take it off 
the hose.

:

Push the new pickup body into the 
hose.

:

Place the pickup body in the tank.

For automatic and reliable 
lubrication of the chain and guide 
bar – use only an environmentally 
compatible quality chain and bar 
lubricant with non-fling additive 
or the rapidly biodegradable 
STIHL BioPlus is recommended.

Biological chain oil must be resistant 
to aging (e.g. STIHL BioPlus) since 
it will otherwise quickly turn to resin. 
This results in hard deposits that are 
difficult to remove, especially in the 
area of the chain drive, clutch and 
chain. It may even cause the oil 
pump to seize.

The service life of the chain and guide 
bar depends on the quality of the 
lubricant. It is therefore essential to use 
only a specially formulated chain 
lubricant.

001BA162 KN

001BA163 KN

165BA003 KN