Scientific Atlanta 4250HDC Benutzerhandbuch

Seite von 25
Connecting the Set-top
To connect your set-top to your entertainment devices, complete these steps.
Identify the additional 
devices you will connect 
to the set-top and TV. 
See pages 12 through 
17 and the related user 
guides for your devices 
for more information.
VCR
DVD
D-VCR
Determine if your 
TV is HD or SD and 
whether it is wide 
screen (16:9) or 
standard screen 
(4:3). See page 11 
for more information.
Home Theater
4
3
16
9
or
Make the connections for your TV and/or VCR as follows:
•  If you are using an HDTV, see page 6 and the connection diagrams at the end   
  of  this guide.
•  If you are using an SDTV, see page 7 and the connection diagrams at the end   
  of  this guide.
•  If you want to archive some programs to VCR tape, see pages 6 and 7 and the  
  connection diagrams at the end of this guide.
!
3
1
2
4
Plug the set-top and the TV into an AC power source that is not controlled by a 
switch.
To provide some protection against voltage surges and built-up static charges 
that can be caused by lightning storms and power outages, ground (earth) your 
electronic devices, such as by plugging the set-top into a surge protector.
5
Do not turn on the set-top or TV yet.
POWER
6
It may take several minutes for the set-top to receive the latest software, 
programming, and service information. Wait until you see one of the following 
displays on the front panel of the set-top that indicates that the update is complete:
•  Current time 
•  Four dashes (- - - -) 
Note: If four dashes are displayed, you must call your service provider to get the set-
top authorized.
7
Set up your set-top for HDTV or SDTV by completing the following steps: 
•  Make sure the set-top is Off and the TV is On
•  On the front panel of the set-top, press GUIDE and INFO at the same time. 
•  Follow the on-screen instructions to choose HD or SD mode and wide screen    
  (16:9) or standard screen (4:3) depending upon your TV type. See page 11 for   
  more information on the scan rate. 
•  At the conclusion of the on-screen instructions, press POWER on the set-top  to  
 begin 
watching 
TV.
Other