Scientific Atlanta 4250HDC Benutzerhandbuch

12

The HDMI interface automatically conÞ gures the audio output for a format supported by the 
television. Because not all TVs support the Dolby®

 

Digital input, the HDMI interface may 

automatically select a 2-channel stereo audio conÞ guration instead of Dolby Digital, which it carries 
over to the other digital audio outputs of the set-top. This prevents your home theater system or 
Dolby Digital decoder from providing the full Dolby Digital surround-sound effect.
You can override this conÞ guration by completing the following steps.
1. Press SETTINGS twice on the remote control to open the General Settings menu.
2. Press MOVE UP or MOVE DOWN to select the option Audio: Digital Out.
3. Press MOVE RIGHT to select Dolby Digital. This setting will send Dolby Digital audio to the  

 

 

HDMI, DIGITAL AUDIO OUT, and OPTICAL AUDIO OUT connectors on the set-top.

Notes: 

• 

If the TV is not Dolby Digital capable, it may not produce audio through its speakers when the  

 

  Audio: Digital Out setting on the set-top is set to Dolby Digital. You can either switch the Audio:    
  Digital Out setting back to HDMI when you are not using the home theater or Dolby Digital  
  decoder, or you can connect the baseband audio outputs (OUT 1 Audio Left and Right) to the TV.

• 

Digital content is encrypted with High-Bandwidth Content Protection (HDCP) on the DVI/HDMI    

  port. This set-top is not compatible with devices that do not support HDCP. You must use  

 

  either the PrPbY or 1394 connection to connect the set-top to these devices.

• 

1 HDMI-to-HDMI cable

T12968

eCM MAC:   001868C16907

STB RF MAC:  001868C16906

STB SN:   SABNFSRVG