Pengo Computer Accessories EQUITY SERIES COMPUTER 386SX Benutzerhandbuch

Seite von 9
EQUITY 386SX
Installation/Support Tips
Power
The Equity 
 
 a power supply 
 is switchable
between 
 for USA and Canadian 
 and 
 for
 in other countries. The voltage switch is located at
the rear of the CPU between the AC inlet and the AC
outlet. 
 
 below)
 
 voltage   
not changed between
the AC inlet and the AC outlet. If the CPU is
 for 
 in order to function in Europe, only
peripherals 
 for use at 
 should be
plugged into the 
 
hard disk 
CPU SPEEO
 
 
Installing Floppy Disk Drives
When installing a floppy disk drive as drive 
remember to set the drive select jumper to the
second position and attach the pas&through
Equity Series Computers
connector on the 
 
 
 cable
If the 
 
 not 
 normally, make
 in SETUP. 
 
 that any
been installed correctly.
Installing Hard Disk Drives
It is recommended that 
 AT-type hard
disk controller be used in the 
 
 
you are installing 
 that cannot make use
of the internal hard 
 
 
remember to 
 the 
 hard disk
controller when 
 such 
 you are having 
 in formatting the
 
 option In 
setup
When 
 an 
 expanded memory
board, do not list the memory under the
memory 
 
 in SETUP. That
option is for EXTENDED memory ONLY.
 
 
a hard 
disk drive, be sure to
 for the 
 type which fits the
 you are installing.
Adding Memory Modules
The total amount of memory must be one of
the following: 1 MB, 
 
 
 
 12MB or 14MB.
Memory banks must be filled with one size
SIMM. You cannot mix SIMM types in one
bank.
 
 
 
 The rest of the 
 accept
only 1 MB 
 The 
 SIMM sockets
must be filled before using any of the 1 MB
sockets.
Software Problems
When installing a copy-protected software
package on the Equity 888% first try the
EQ386SX-5