KVH Industries KVHTRACVISION L2 Benutzerhandbuch

Seite von 69
5-2
A Guide to TracVision L2
5.3
Replaceable Parts
TracVision L2 has been designed with durability and low
maintenance in mind. If you experience an operating problem or
otherwise require technical assistance, contact your local
authorized TracVision L2 dealer/installer first. Have the antenna
unit serial number ready with a list of the trouble symptoms. If
an authorized dealer/installer is not located nearby, contact the
factory directly at the telephone, facsimile, or e-mail listings
inside the front cover.
Replacement part numbers for units that can be serviced in the
field are listed in Table 5-1. These parts may be obtained from
any KVH authorized dealer/installer.
Part Name
Part Number
Radome Assembly
02-0953-08
Baseplate Assembly
02-1198-01
Data/Power Cable
32-0730-28
RF Cable
32-0417-28
CPU PCB
02-1144-01
Antenna Gyro
02-1035
Antenna Gyro Gasket
24-0139
System Fuse
16-0017-3150
LNB
19-0056
It is recommended that all other technical difficulties be resolved
by returning the TracVision L2 unit to an authorized service
provider.
Table 5-1
Field Replaceable Units
Should the fuse ever need to be
replaced, TracVision L2 uses 
a 5x20mm, 3.15-amp, 250-volt fast-
blow fuse.
The serial number of your
TracVision L2 will be required
during any troubleshooting or
service calls. You will find the 
serial number on the