Jensen VM9022 Benutzerhandbuch

VM9022

Pairing the Bluetooth System with

Your Mobile Phone and Head Unit

Press the

button (8) to initiate the pairing process.

Keep the mobile phone within 2 meters of the head unit
when pairing. (To terminate the pairing process, press

the

button again.)

Select the Bluetooth setup option on the mobile phone
to be paired (please refer to the phone’s instruction
manual to learn how to enter Bluetooth setup, turn
Bluetooth on/off, and perform pairing).

NOTE: Some phones require a “pass key” or pairing
code to connect. If your phone requires a pass key or
pairing code, you will need to enter this number in the
Pairing Code field under the Bluetooth SETUP menu. The
default pairing code for many phones is “0000”. The
default code for the VM9022 is “1234”. See “Bluetooth
Sub-menu Features” on page 18 for instructions on
entering the pairing code.

Select “VM9022” from the pairing list on the mobile
phone.
•

If pairing is successful, the TFT will display the paired
mobile phone model number or name (as specified in
your phone’s Bluetooth Setup menu).

•

If pairing fails, “Phone Pairing Fail” is displayed at the
bottom of the screen.

Reconnecting

Once the Bluetooth device has been paired, you can touch

the connect

button to reconnect.

NOTE: You can only connect to a phone using the
buttons on the on-screen Phone interface.

Each time the

button is pressed, the head unit will

automatically reconnect with the mobile phone once (only if
the mobile phone was previously paired with the head unit).

Managing Incoming Calls

When connected to a Bluetooth phone, the unit will mute
audio output, pause CD play, and change to the Bluetooth
screen when a call is received. An incoming phone number
will appear at the top of the screen.

Answering an Incoming Call

To answer the call, touch the

button.

For best reception, speak loudly and clearly. The microphone
is located on the left side of the unit.

To end the conversation, press the

button. The screen will

display the call duration for 3 seconds, and then return to the
previous mode.

Rejecting an Incoming Call

Touch the

button to reject an incoming call. The call will

revert to your phone and can be answered directly or left for
voice mail.

Volume Control

To increase or decrease the volume level, turn the rotary
encoder (5) on the front panel or press the VOL+/ VOL-
buttons (15, 16) on the remote control.

Microphone Mute

To mute the microphone, touch the

button. Touch again to

resume microphone functionality.

Making an Outgoing Call

NOTE: Press the

button from the main Bluetooth

screen to automatically dial the last call received.

Touch the

button to open the direct dial screen.

Use the 0-9, *, and # buttons to input the phone number.
•

Touch the CLEAR button to clear the last digit.

•

Touch the

button to clear the entire number and

start over.

After entering the phone number, press the

button to

dial the call. The direct dial screen will close once your
call is connected.

To end the conversation, press the

button.

Call Transfer

While talking, to transfer audio from the head unit back to the

mobile phone, touch the

button (7). The TFT will display

“Transfer”. You can only transfer a call after it has been
answered.

Menu List

The menu list appears on the left side of the screen and can
be accessed from other modes by touching the MENU button
on the right side of the screen.

NOTE: Not all phones allow access to missed, received
or dialed calls and some will not allow uploading of your
phone’s address book.

Missed Calls

The Missed Calls list retrieves the list of Missed numbers
from your phone. The last missed number is the first number
on the list. Touch the Missed Calls menu option to view the
list. To make a call from the Missed Calls list, touch the

number and then touch the

button. The TFT will display

“Cannot get missed record” when the feature is not available.

Dialed Calls

The Dialed Calls list retrieves the list of dialed numbers from
your phone. The last dialed number is the first number on the
list. Touch the Dialed Calls menu option to view the list. To
make a call from the Dialed Calls list, touch the number and

then touch the

button. The TFT will display “Cannot get

dialed record” when the feature is not available.

Received Calls

Use the Received Calls list to view the last 10 received
numbers stored on your phone. To access the Received list,
touch the Received Calls menu option. The last received
number is the first number on the list. To make a call from the

Received Calls list, touch the number and then touch the

button. The TFT will display “Cannot get received record”
when the feature is not available.

Phone Book
1.

Touch the Phone Book menu option to display the
phone book stored on your mobile phone, if compatible.
The screen will display “Ready...” while the phone book
is downloading.

Once the download is completed, you can use the arrow
buttons and scroll bar on the right side of the window to
navigate the list. Since the unit downloads one page of
entries at a time, there may be a slight delay while the
next page of numbers is downloaded.

Exit

Clear