Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Motion
  4. CL900 FWS-001
  5. Benutzerhandbuch

Motion CL900 FWS-001 Benutzerhandbuch

Download
Seite von 81
62    
Chapter 4
Troubleshooting and FAQs
Troubleshooting
The CL900 responds to my finger but not my pen
•
The tablet may be configured to ignore pen input. To check, open 
 
then tap Pen & Tablet. Tap Touch Settings and tap the Digitizer Options tab. Set Input 
mode to the recognize both touch and pen.
The CL900 tablet is too sensitive to touch 
•
Consider changing a touch setting so that you have to double-tap the display to enable 
touch. Open 
 then tap Pen & Tablet. Tap Touch Settings and then 
Auto mode. 
The touch pointer jumps around the display and the display flickers
•
In some cases, the tablet’s touch system gets out of sync. To fix it, you can re-tune it. 
Open 
, then tap Pen & Tablet, tap Touch Settings, tap Touch Tuning, 
then Start. A calibration program begins. Do not touch the display until the program has 
finished. 
Calibrate does not work 
•
The Tablet PC Settings Display tab has a Calibrate option but it does not apply to the 
CL900. Instead, if touch input does not behave as expected, you can re-tune touch.Open 
, then tap Pen & Tablet, tap Touch Settings, tap Touch Tuning, then 
Start. A calibration program begins. Do not touch the display until the program has 
finished.
Ports and connectors problems
The system does not recognize the USB 2.0 device
•
Windows 7 may take a short time to recognize the USB device. Wait a few moments to 
see if Windows recognizes the device.
•
The device may not be connected properly. Check the connection and ensure it is 
inserted properly into the USB port.
•
The correct driver might not be included with Windows 7. Check the manufacturer’s 
website for a current driver.
The CL900 is in its dock, but the system does not recognize any accessory devices, 
such as the external disk drive or monitor
•
The CL900 may not be fully seated in the dock. Remove it from the dock and then 
replace it.
Network problems
The wireless adapter keeps connecting even when I do not want it to
•
Disable the desired wireless adapter from the Motion Dashboard. Open 
 tap Wireless and clear the check box next to the wireless adapter that you 
want to disable.