Maxon Telecom MODMAX MM-6280IND Benutzerhandbuch

 

 

Extended AT Commands Manual 

Page 10 of 70 

2009-06-25 

The following terms are used throughout this document. We have provided and explanation of 
these for your reference. 
Table 1-1 

Field. Contents between ‘<’ and ‘>’ indicate the name of the field or the 
parameter required to complete the syntax. 

Delimiter/Space. Insert a space. 

Communications command set interface between data terminal 
equipment (DTE) and data circuit terminating equipment (DCE). 

Base Station. Primarily a mobile phone tower in the carrier’s domestic 
public cellular phone network used as the network end point for 
communicating with mobile stations. Depending upon the context, the 
term may refer to a cell, a sector within a cell, an MSC, an IWF, or 
other part of the cellular system. 

Base Station Controller. 

Same as MT2. 

Same as TE2 

Inter-working Function. An IWF provides the functions needed for data 
terminal equipment connected to a mobile termination to inter-work 
with terminal equipment connected to the PSTN. A physical 
implementation may include a pool of modems. 

Mobile-Originated where the SMS or the call is originated [sent] by the 
Mobile Station. 

A cellular device [e.g. this modem or a mobile phone handset] in the 
carrier’s domestic public cellular phone network intended to be used 
when stationary, while in motion or during halts at unspecified points. 
Mobile stations may include fixed, portable (e.g., hand-held personal 
units) or vehicular units. 

Mobile Switching Centre 

Mobile-Terminated where the SMS or the call is terminated [received] 
at the Mobile Station. 

Mobile Termination 2An MT2 provides a non-ISDN (Rm) user interface, 
e.g., CCITT V series or CCITT X series. Same at DCE. Refers to the  
modem. 

Non Volatile Memory. User changeable and is written at time of change 
or entry to a separate section of memory unaffected by power cycles. 
The setting value is available in all profiles.