Hotbrick VPN 800 / 2 Benutzerhandbuch
HotBrick Network Solutions
Syslog Configuration
Syslog Delivery
Sending out – Check this, if you want to send syslog messages to other
machine.
machine.
Keep Send messages – Check this, if you want to keep sent messages,
otherwise the sent message will be delete.
otherwise the sent message will be delete.
Syslog Server - IP address: Up to 3 syslog servers can be used.Enable:
You can enable or disable each server temporarily. Port: If your syslog
server does not use the default port, you can change it.
You can enable or disable each server temporarily. Port: If your syslog
server does not use the default port, you can change it.
Log Priority For
Modules
Modules
The syslog messages are divided into 8 levels, from Emergency to Debug
level. The lower level, the less messages will be generated. Emergency is
the lowest priority level, and Debug is the highest one.
level. The lower level, the less messages will be generated. Emergency is
the lowest priority level, and Debug is the highest one.
SNTP Configuration
Time Zone – You can setup system up time using SNTP ( Simple Network
Time Protocol), and there are 3 SNTP server that you can define on the
SNTP configuration.
Time Protocol), and there are 3 SNTP server that you can define on the
SNTP configuration.
Page 65