Emerson FTA1100 Benutzerhandbuch

1

Use                arrows to enable or disable automatic Daylight Saving time adjustments.  Press              to confi rm.

(DST +) “Begin” - Hour

Use               arrows to set number of minutes to adjust for at the beginning or end of Daylight Saving 
time.  Press            to confi rm.

(+/-)

Use               arrows to set the hour of day that Daylight Saving time begins.  Press            
to confi rm.

(DST +) “Begin” - Day

Use                             arrows to set the day of the month that Daylight Saving time begins.  
Press            to confi rm.

(DST +) “Begin” - Month

Use               arrows to set the month of the year that Daylight Saving time begins.  
Press            to confi rm.

(Example:  Hour=2:00, Day=2nd Sun, Month=Mar means Daylight Saving time would begin at 2:00a.m. on the 2nd 
Sunday in March)

(DST -) “End” - Hour

Use               arrows to set the hour of day that Daylight Saving time ends.  Press            to 
confi rm.

(DST -) “End” - Day

Use                             arrows to set the day of the month that Daylight Saving time ends.  
Press            to confi rm.

(DST -) “End” - Month

Use               arrows to set the month of the year that Daylight Saving time ends.  
Press            to confi rm.

(Example:  Hour=2:00, Day=1st Sun, Month=Nov means Daylight Saving time would end at 2:00a.m. on the 1st Sunday 
in November)

1

Use                              arrows to set preferred on delay time.  Press           to confi rm.

Note: On Delay (also known as sequential start) time, delays the starting of the motor when an automatic call to start is 
received.

1

Use                 arrows to set timer mode to Minimum Run or Off Delay.   Press         key  and use                             keys to set 
desired time.  Press           to confi rm.
Note: Minimum Run time will begin when motor starts, Off Delay time will begin when system pressure has been 
restored to Stop pressure setting.

1

Use                 arrows to set preferred pressure unit system (psi, bar, kPa).  Press           to confi rm.

1

Use                 arrows to set desired pump start pressure.  Press           to confi rm.

1

Use                 arrows to set desired pump stop pressure.  Press           to confi rm.
Note:  Pump stop pressure must be set below the pump “churn” pressure (including minimum suction pressure), oth-
erwise the pump will run continuously once started.

1

Use                 arrows to enable or disable the automatic shutdown disabled feature.  Press           to confi rm.
Note: Enabling this feature makes the controller “manual stop only”.

9