Avid Technology Car Video System PT Benutzerhandbuch
Media Station|PT Guide
118
To change audio pull up/down settings in
Pro Tools:
Pro Tools:
1
In Pro Tools, choose Setup > Session.
2
From the Time Code Settings section of the
Session Setup window, select a rate from the Au-
dio Rate Pull Up/Down pop-up menu.
dio Rate Pull Up/Down pop-up menu.
3
Click OK to apply the new pull up/down rate
to the session.
Matching Time Code Format (Drop
Frame or Non-Drop Frame)
Frame or Non-Drop Frame)
Pro Tools and Media Station|PT must be set to
the same time code format (either Drop Frame
or Non-Drop Frame).
the same time code format (either Drop Frame
or Non-Drop Frame).
To ensure time code format settings are
compatible:
compatible:
1
In Pro Tools, choose Setup > Session. If the
Time Code rate pop-up menu displays “DF” after
the frame rate, Pro Tools is set to Drop Frame.
the frame rate, Pro Tools is set to Drop Frame.
2
In Media Station|PT, right-click the Record
monitor, and choose Get Clip Info.
If the numbers in the TC fields are separated by
semi-colons instead of colons, the project is set
to Drop Frame.
semi-colons instead of colons, the project is set
to Drop Frame.
3
If both time code formats do not match, do
one of the following:
• To force Pro Tools to match the time code
format of Media Station, select the compat-
ible time code format from the Time Code
Rate pop-up menu.
ible time code format from the Time Code
Rate pop-up menu.
• To force Media Station|PT to match the
time code rate of Pro Tools, type semi-co-
lons (Drop Frame) or colons (Non-Drop
Frame) between the numbers in the Start-
ing TC field, and press Enter.
lons (Drop Frame) or colons (Non-Drop
Frame) between the numbers in the Start-
ing TC field, and press Enter.
Pull Up/Down section of the Session Setup window
Right-clicking the Record monitor
In some project formats, Media Station|PT
can be configured for Drop Frame or Non-
Drop Frame, while the corresponding
Pro Tools time code rate can only be set to
Non-Drop Frame. In such cases,
Media Station|PT sends Non-Drop time
code information to Pro Tools, even if it is
set to Drop Frame. The following project for-
mats in Media Station|PT exhibit this be-
havior: 23.976p NTSC, 24p NTSC, and
720p/23.976.
can be configured for Drop Frame or Non-
Drop Frame, while the corresponding
Pro Tools time code rate can only be set to
Non-Drop Frame. In such cases,
Media Station|PT sends Non-Drop time
code information to Pro Tools, even if it is
set to Drop Frame. The following project for-
mats in Media Station|PT exhibit this be-
havior: 23.976p NTSC, 24p NTSC, and
720p/23.976.
Clip Info dialog (Media Station|PT, top) and a portion of
the Session Setup window (Pro Tools, bottom)
the Session Setup window (Pro Tools, bottom)
Starting
TC field
TC field
Session
Start field
Start field
Time
Code Rate
Code Rate