Avaya Bogen APS Custom Anleitung Für Quick Setup

Seite von 75
5 • 8
NOTE: The Main Menu does not specify 
*
(star) as an option.
3.  Using the telephone keypad, enter your extension number.
4.  Enter your user password and press # (pound).  The system will not re c o g n i z e
the password as valid until the # (pound) key is pressed.
5.  The system prompts you to select the specific paging method from your 
available paging options.  Press 1 to select overhead paging, press 2 for
local wireless pager, press 3 for wide area pager or, if the User May Disable 
Paging Option is set (see section 3.4.1.5, Selecting the User May Disable 
Paging Option), 
press 4 to disable paging (see Figure 3-11). 
6.  To confirm and save your selection, press 1.  To select a different paging
option, press 2.  
When an individual is away from his or her desk and/or telephone, the APS Custom will
activate, allowing the caller to send a page.  The type of page sent is determ i n e d by the
paging method specified by the user and the capabilities and functions of the PBX, including
call park support.  
To  ensure  that  the  Park  and  Meet-Me  Feature  operates  corre c t l y,  the  following 
re q u i rements must be met.
The PBX must allow outside calls to be parked from either of the 
APS Custom service ports (ports 1 and 2). 
The APS Custom service ports must be analog Industry Standard
Telephone (IST) type extensions.  
The PBX must also allow any extension in the building to retrieve or Pick-Up
a parked call.
The PBX must allow a minimum of two outside callers to be parked 
simultaneously on the PBX system.
NOTE:  Proper configuration of this feature requires the user to understand
the operation of the PARK/PICK-UP on the local PBX.  Consult your 
PBX manufacturer or supplier before configuring this feature.
5.5
S e n d i n g   a  P a g e