Atmel SpaceWire Router SpW-10X Benutzerhandbuch
Ref.: UoD_SpW-10X_
UserManual
Issue: 3.4
SpW-10X
SpaceWire Router
User Manual
Date: 11
th
July 2008
Preliminary
75
packet is corrupted
Early EOP
The command packet was
terminated early with an
EOP. A reply packet is sent if
the early EOP error occurs
on the data part of the packet
terminated early with an
EOP. A reply packet is sent if
the early EOP error occurs
on the data part of the packet
Yes Early
EOP
5
Cargo too Large The expected amount of
SpaceWire cargo has been
received without receiving an
EOP marker
received without receiving an
EOP marker
Yes
Cargo too large
6
Early EEP
The command packet was
terminated early with an
EEP. A reply packet is sent if
the early EEP error occurs
on the data part of the packet
terminated early with an
EEP. A reply packet is sent if
the early EEP error occurs
on the data part of the packet
Yes Early
EEP
7
Verify Buffer
Overrun Error
Overrun Error
The data length field is
invalid when performing a
verified write command. The
valid length is 4 bytes of
data.
invalid when performing a
verified write command. The
valid length is 4 bytes of
data.
Yes
Verify Buffer Overrun
9
Command not
implemented
implemented
A command code was
received which is not
supported by the SpaceWire
router. Supported command
codes are listed in F1-18.
received which is not
supported by the SpaceWire
router. Supported command
codes are listed in F1-18.
Yes
RMAP Command not
implemented or not
authorised
implemented or not
authorised
10
Invalid Data
Length
Length
The data length field is
invalid. A data length error is
recorded when:
invalid. A data length error is
recorded when:
1. The data length is
not a multiple of 4.
2. The data length is
zero
3. The data length is
outside the range 4-
1064 when
performing an
Yes
RMAP Command not
implemented or not
authorised
implemented or not
authorised
(ote 1: a Verify Buffer
Overrun error shall be
returned when the data
length is not 4 in a
verified write command.
Overrun error shall be
returned when the data
length is not 4 in a
verified write command.
Note 2: a Read Modify
Write Data Length error
shall be returned when
the data length is not 8.
Write Data Length error
shall be returned when
the data length is not 8.
10