ATD Tools Blower ATD-30300 Benutzerhandbuch
Warning: When using electric products, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury. Follow these
important safety guidelines:
• Do not use this fan with any solid-state speed control device.
• Do not use an extension cord with this air mover.
• Do not expose to rain. Store indoors.
• Do not use with damaged cord, plug or other parts.
• Keep cord away from heated surfaces.
• Do not handle plug or the air mover with wet hands.
• Do not permit fingers to touch the terminals of plug when installing or
removing the plug from the outlet.
* After servicing, any safety device (includes grilles, impeller, etc.) shall be reinstalled
or remounted as previously installed.
Troubleshooting
Problem
Solution
The ATD Blower unit won’t run.
1. Ensure that The ATD Blower unit is
securely plugged into outlet or power
source.
2. Check that outlet or power source is
receiving power.
3. Check that The ATD Blower unit is
turned on.
The ATD Blower power receptacle not
working.
1. Ensure that The ATD Blower unit is
securely plugged into outlet or power
source.
2. Check that outlet or power source is
receiving power.
3. Press the reset button above the
power receptacle.
Parts Listing
ATD-30300
ATD-31200
ORDERING PART# PART DESCRIPTION
ORDERING PART# PART DESCRIPTION
PRT30300-01
MOTOR
PRT31200-01
MOTOR
PRT30300-02
CAPACITOR
PRT31200-02
CAPACITOR
PRT30300-04
FAN WHEEL
PRT31200-04
FAN WHEEL
PRT30300-11
SPEED CONTROL KNOB
PRT31200-11
SPEED CONTROL KNOB
PRT30300-12
POWER SWITCH
PRT31200-12
POWER SWITCH
PRT30300-15
CIRCUIT BREAKER
PRT31200-15
CIRCUIT BREAKER