Digimerge DGRT400 Benutzerhandbuch

USING THE CLIENT SOFTWARE 

30 

 

 
The motion detection function of the DVS provides you with the ease and convenience of 

automatic monitoring from a remote location. Pressing the 

 (Motion detection) button 

brings up the motion sensitivity control window shown in Figure 11. If you wish to use video 
motion detection, you can set the sensitivity level using the Motion threshold slider.  You can 
test the sensitivity level. The Running man image will start to flash when motion is detected. It 
is also possible to assign motion detection to cameras by checking Include /exclude camera in 
motion detection check box.  
 
 
 
 
 
 

 

 

Note: 

1. When this window is activated, images in the Image window will be updated as 
an alarm event. To return back to normal image update you should deactivate this 

window by pressing 

 again or by activating another control window. 

 

2. Sometimes one or more video inputs can be sensitive, even though there is no 
visible motion in the monitoring areas. This may be due to daylight lamp usage 
(not incandescent lamp) different camera types, or possibly different electrical 
levels of video input signals (perhaps video cable connection quality). Try 
changing the video inputs, or refrain from using certain video inputs for motion 
detection purpose. 

 
After pressing the Break connection and switch to callback mode button, the DVS will go to 
Callback mode. Please refer to the section 5.9 for the details on the callback function. 

Break connection and switch to callback mode

Include /exclude camera in motion detection

Current motion activity indicator 

Motion threshold slider 

Running man