Bravetti 524-15B Benutzerhandbuch

Seite von 80
20 
 
PERFORMING MAINTENANCE (CONT.): 
Always use the proper tools or equipment for the job at hand. 
Use extreme caution when making adjustments. 
Never use our hands to locate hydraulic leaks on attachments.  Use a small 
piece of cardboard or wood.  Hydraulic fluid escaping under pressure can 
penetrate the skin. 
When disconnecting hydraulic lines, shut off hydraulic supply and relieve all 
hydraulic pressure. 
Openings in the skin and minor cuts are susceptible to infection from hydraulic 
fluid.  If injured by escaping hydraulic fluid, see a doctor at once.  Gangrene 
can result.  Without immediate treatment, serious infection and reactions can 
occur. 
Replace all shields and guards after servicing and before moving. 
After servicing, be sure all tools, parts and service equipment are removed. 
Do not allow grease or oil to build up on any step or platform. 
Never replace hex bolts with less than grade five (5) bolts unless otherwise 
specified. 
Where replacement parts are necessary for periodic maintenance and 
servicing, genuine factory replacement parts must be used to restore your 
equipment to original specifications.  ROTO-MIX will not claim responsibility for 
use of unapproved parts and/or accessories and other damages as a result of 
their use. 
If equipment has been altered in any way from original design, ROTO-MIX does 
not accept any liability for injury or warranty. 
A fire extinguisher and first aid kit should be kept readily accessible while 
performing maintenance on this mixer/feeder.
 
SAFETY
READ BEFORE
YOU FEED