Bravetti F1065D Benutzerhandbuch

Do not put solid shortening in 

the oil container or the frying basket.

• If using solid vegetable shortening, melt 

it first in a separate pan and then very 

carefully pour the melted fat into the 0il 

container.

• Previously used solid vegetable 

shortening which has curdled and 

hardened in the oil container should be 

removed from the oil container and 

melted in a separate pan before reusing.

If you try to melt the solidified 

fat in the oil container, there is a risk of 

warm melted fat suddenly sputtering from 

below through the still solid top layer of fat.  

Therefore use only the following procedure:
• Make sure the fat is at room 

temperature.  If the fat is very cold, there 

is a greater risk of splashing.

• Using a fork, carefully make some holes 

in the fat.  Make sure the lid is securely 

closed while fat is melting.  Press the 

"Function" Reset  button and press timer 

button to set the time you require.

• Lift up the Control Panel with Heating 

Element.

• Insert the "Guide Edges" on the Control 

Panel into the "Guide Rails" mounted 

on the metal body.

• Slide the "Guide Edges" down till the 

end.

The Automatic 

Safety Switch ensures that the unit will 

not operate unless the Control Panel has 

been inserted into the "Guide Rails" on 

the metal body correctly.

Never plug in the Deep Fryer 

before filling with oil to specified level.  

Always make sure control panel is securely 

in place in the body and the heating 

element  is inside the oil in the container 

before plugging in.

5

Never plug in the Deep Fryer 

before filling with oil. (See "Filling" 

instructions on page 4.) Always unplug 

the appliance when not in use. 
• Make sure the oil level in the oil 

container is between the "minimum " 

and " maximum " lines inside the oil 

container.

• The frying basket should not be 

immersed in the oil during the pre-

heating.

• Replace the lid cover.

• Plug the appliance into a 120-volt 

outlet.The unit beeps .

• Press the power button.  The unit beeps 

and the power indicator light comes on . 

It’s showing that the power on. The 

upper  screen display 320 

°F and the 

lower screen displays _ _: _ _ . It’s in 

constant boiling status. 

• Set the required temperature – The 

temperature is adjustable from 155 

°F 

to 385 

°F in 5ºF increments. If you 

want to elevate the temperature, press 

the button. When you press the button 

the unit  will beep. If you want to lower  

the temperature, press the button. 

When you press the button the unit  will 

beep and the upper screen will display 

the temperature that you set. When the 

setting temperature is reached, the 

green ready indicator light come on.

Fig. 3

• Timer: The MAX timer time is 15 

minutes. If you want to add time, please 

press "+"  button. If you want  to 

subtract time please, press "-" button. 

The lower screen will display the time 

that you set.

• Reset function: If you press the function 

reset button, the unit is in default status. 

The default temperature is 320 

°F and 

the default time is 00:00.

9. Function 

Reset 

Button

10.

Power Button

11. / 12. Timer Adjustable Button
13. / 14. Temperature Adjustable Button

15.

Digital Display

16.

Ready Indicator Light (green)

17.

Power Indicator Light (red)

• Use blended vegetable oil, pure corn oil 

or canola (rapeseed) oil.  Do not use 

olive oil, margarine, lard or drippings. 

• The oil level must always be maintained 

between the minimum  and the 

maximum  levels marked inside the oil 

container.  Check the oil level before 

each use.  For best results, keep the oil 

close to the maximum level (14 cups/3.5 

liters). Fig. 3

• Never mix different oils and fats together.  

Do not mix old and new oil.

Never plug in the Deep Fryer 

before filling with oil to specified level.  

Always make sure control panel is 

securely in place in the body and the 

heating element is inside the oil in the 

container before plugging in.

Ensure the control panel is 

fitted correctly to the main unit otherwise 

the unit will not function.  This is not a 

defect.  This product is fitted with a safety  

switch to prevent the unit from turning on 

accidentally.

6