Beko WMD 78144 Benutzerhandbuch

EN

18

means higher power consumption.

C  For further program details, see  

“Program Selection Table”

For specific applications, select any of 

the following programs:

This program is used when you want to 

rinse or starch separately.

This program spins with maximum 

possible rpm in the default setting after 

the water drains from the machine.

C  Use a lower spin speed for delicate 

laundries.

Whenever a new program is selected, 

the temperature anticipated for that 

program appears on the temperature 

indicator (13b).

To change the temperature, press 

the temperature button (Figure

2-9). Temperature decreases in 10°

increments.

Cold selection is shown with “-” symbol.

When the “Temperature” button is

pressed after Cold is selected, the 

maximum temperature of the program 

you have selected will be displayed.

To decrease the temperature, press the 

“Temperature” button again.

90˚C

Normally soiled, white cottons and 

linens. (Ex.: coffee table covers,

tablecloths, towels, bed sheets)

60˚C

Normally soiled, fade proof colored 

linens, cottons or synthetic clothes 

(Ex.: shirts, nightgowns, pajamas)

and lightly soiled white linen clothes 

(Ex.: underwear)

40˚C

30˚C

Cold 

Blended clothes including 

synthetics and woolens as well as 

delicates.

Shows energy saving programs and 

temperature selections.

As "Intensive" and "Hygiene" programs 

are long programs with higher 

temperature selections to ensure 

hygiene, “Economy” Symbol (Figure

3-13g) will not light up.

e

Whenever a new program is selected, 

the maximum spin speed of the selected 

program is displayed on the spin speed 

indicator (Figure 3-13a).

To decrease the spin speed, press 

the “Spin” button

 (Figure 2-7). Spin

speed decreases gradually. Then, rinse 

hold and no spin options are shown 

respectively.

Rinse hold is shown with “

” and no

spin is shown with “ ” symbols.

e

If you are not going to unload your 

clothes immediately after the cycle, you 

may use rinse hold function in order to 

prevent your clothes become wrinkled 

when there is no water in the machine. 

With this function, your laundry is kept in 

the final rinsing water. If you want to spin 

your laundry after the rinse hold function:

-   Adjust the spin speed.

-  Press “Start/Pause/Cancel” button.

Program resumes. Your machine

drains the water and spins your 

laundry. 

You can use no spin function in order to

drain the water without spinning at the 

end of the program.