Beko WMD 78144 Benutzerhandbuch

EN

9

Tilt the machine to remove the 

packaging reinforcement. Remove the 

packaging reinforcement by pulling the 

ribbon.

C  Transportation safety bolts must 

be removed before operating the 

washing machine! Otherwise, the

machine will be damaged!

1.   Loosen all the bolts with a spanner 

until they rotate freely (“C”)

2.   Remove transportation safety bolts 

by turning them gently.

3.  Fit the covers (supplied in the bag

with the Operation Manual) into the

holes on the rear panel. (“P”)

C  Keep the transportation safety

bolts in a safe place to reuse when 

the washing machine needs to be 

moved again in the future.

C  Never move the appliance without 

the transportation safety bolts 

properly fixed in place!

Install the appliance in environments 

which have no risk of freezing, in a 

stable and level position.

C  The floor must be capable of 

carrying the load on it!

C  If the washing machine and a drier 

are placed on top of each other, 

their approximate weight together 

may reach 180 kg when they are 

full.

Important:

•  Do not place the appliance on top of

the power cable.

•  Keep at least 1cm distance from the

edges of other furniture.

•  Place the machine on a firm surface;

do not position it on a long pile rug 

or such like surfaces.

C  Do not use any tools to loosen the 

lock nuts. Otherwise, they can be

damaged.

1.  Manually (by hand) loosen the lock

nuts on the feet.

2.   Adjust them until the machine 

stands level and firm.

3.  Important: Tighten all lock nuts up

again.