Beko 15LB250MID Benutzerhandbuch

14 

You can select subtitle and sound language 

provided that the broadcast is supported for 

all digital broadcasting channels. Unless you 

make a selection, the language supported by 

the broadcaster will be selected automatically.

To perform language selection, select 

Subtitling Language 1, Subtitling 

Language 2, Audio Language 1, 

Audio Language 2 tab from the 

Language Settings menu by using 

Up/Down movement buttons and 

make your language selection with 

Left/Right movement buttons. You 

can also select subtitles directly by 

SUBT button on your remote control 

or make sound selection by 

AUDIO 

button.

With this feature, you can lock the channels 

that are not suitable for children. 

Access Control
Lock/Unlock Channels

Change PIN

Select

Back

Lock/Unlock Channels: Select Lock/

Unlock Channels tabs from Access Control 

menu and press 

OK button to confirm. All 

TV Channels list will be displayed; select the 

channel you want to lock with 

Up/Down 

movement buttons and press 

OK button 

to confirm. 

x mark will be displayed at the 

beginning of the channel which is locked. 

To unlock, repeat the same steps. Select 

the channel to access the locked channel 

and enter the correct password into the 

displayed password screen. The channel 

will not be displayed unless the correct 

password is entered.
Note 1: To re-prevent access after entering 

the correct password and displaying the 

locked channel, your television has to be 

switched to Standby mode and turned on 

again.

Note 2: The password has been set as 0000 

at the factory. You can change the password 

as you wish under 

Change PIN item in the 

Access Control menu. 

With this feature, you can decide whether 

to display in the list the channels that could 

not be unscrambled by the CI card installed 

on your television. To do this, you can select 

ON, OFF or AUTO options.

In this menu you can view Reminders you 

had entered from the EPG or change the 

entered Reminders.

Please see 6.3.3.2-Creating favorite channel 

list for detailed explanation of this feature.

In this menu, you can check the CI Module 

settings that you can attach to your 

television.

You can display your television’s hardware 

and software data under this menu.

You can either tune the programs 

automatically or manually and store them in 

your television.

Note: If your television does not receive any 

aerial broadcast for a period of 5 minutes, 

it automatically switches to the stand-by 

position. The countdown symbol is displayed 

on the screen during the last 1 minute.

You can tune the programs 

automatically with the Autoprogram 

function of your television and then 

sort the channels as you desire 

by means of the 

Program Table. 

Press the 

MENU button on your 

remote control. Select 

SETUP tab 

by pressing the 

down movement button 

and confirm your selection with 

OK button. 

Setup menu is displayed. Select 

NO tab by pressing the Up/Down