Beko 15LB250MID Benutzerhandbuch

22 

Enter into the 

SETUP menu from the Main 

Menu by pressing the 

MENU button in the 

PC mode. In order to make the necessary 

settings in this menu, you can use the 

/ -VOL/VOL+ movement buttons on your 

remote control. You can make the following 

settings for your monitor in this menu.
9.2.4-HORIZONTAL POSITION:  

Horizontal position setting
9.2.5-VERTICAL POSITION: Vertical 

position setting 

This is the pixel clock frequency. User can 

narrow down or enlarge the display by 

selecting a desired value.

DIGITAL SATALLITE RECEIVER

VIDEO RECORDER

REAR OF THE TELEVISION

Scart 1 TV IN/OUT

Scart 2 AUX IN

ANT IN

ANT OUT

ANT IN

ANT OUT

ANT IN

SCART Socket

SCART socket

Using the 

-VOL/VOL+ movement buttons, 

you can ensure that the colors and shapes 

are exactly consolidated on the PC image.

The most suitable geometric settings 

in accordance with the entry mode are 

configured by this function. For this operation, 

select the 

AUTOCONFIGURATION tab and 

press 

OK button. You can adjust the volume 

level of the source you have connected to the 

Audio-In input at the back of your TV by using 

the 

-VOL/VOL+ buttons.

Note: In the Monitor mode, you can make the 

Brightness, Contrast, Sharpness, Red, Green 

and Blue Settings from the 

PICTURE menu.

Make sure that the power cable of the 

television is connected to the mains and the 

power on-off switch is turned on.

•  Is the aerial cable connected?

•  If you are using a satellite aerial, has the 

aerial been adjusted to receive broadcast 

in the best way?

•  Make sure that the aerial is far from 

devices that emit electromagnetic waves. 

(Neon lights, loudspeakers etc.)

•  Try changing the direction of the external 

aerial. High buildings and mountains 

can cause a faded picture or ghosting 

(double picture).

•  The picture quality can be affected when 

two external devices are connected. Try 

disconnecting one of the devices.

•  Try adjusting the fine tuning.

•  Is the aerial connected correctly?

•  Is there any damage to the aerial cable?

•  Are the plugs on the aerial cable 

connected correctly?

•  Are you sure that you have pressed the 

correct button on the remote control?