Behringer Digital Pro Mixer DDM4000 Benutzerhandbuch
4
DIGITAL PRO MIXER DDM4000 User Manual
1. Introduction
Hook up your turntables and CD/MP3 players to its 4 stereo channels,
each with fully programmable EQ and Kill switches. Put ultimate versatility
at your fingertips with fully programmable beat-sync’able multi-FX modules,
a pair of high-precision BPM counters and a digital crossfader with custom
curve adjustment. And the super-cool BPM-sync’d sampler with real-time pitch
control, loop and reverse functions will make your crowd go wild.
◊
Please read this manual to familiarize yourself with the control
elements of the unit and its functions. After you have carefully
read this manual, keep it for future reference.
elements of the unit and its functions. After you have carefully
read this manual, keep it for future reference.
1.1 Before you get started
1.1.1 Shipment
Your DDM4000 was carefully packed at the factory, and the packaging
Your DDM4000 was carefully packed at the factory, and the packaging
was designed to protect the unit from damage caused by rough handling.
Nevertheless, we recommend that you carefully examine the packaging and its
contents for any signs of physical damage that may have occurred during transit.
◊
If the unit is damaged, please do NOT return it to us; instead,
notify your dealer and the shipping company immediately,
otherwise claims for damage or replacement may not be granted.
notify your dealer and the shipping company immediately,
otherwise claims for damage or replacement may not be granted.
◊
We recommend using a case to ensure optimal protection of the device.
◊
Please always use the original packaging to avoid damage due to
storage or shipping.
storage or shipping.
◊
Never let unsupervised children play with the DDM4000 or
with its packaging.
with its packaging.
◊
Recycle whenever possible.
1.1.2 Initial operation
Ensure adequate air supply and to avoid overheating do not place the unit
Ensure adequate air supply and to avoid overheating do not place the unit
near radiators etc.
◊
Before you connect your DDM4000 to the mains, please make sure
that your local voltage matches the voltage required by the unit.
that your local voltage matches the voltage required by the unit.
Caution! The following applies only to units that can be switched between
120 V and 230 V: The fuse holder on the mains connector has 3 triangular
markings, with two of these triangles opposing each other. The DDM4000 is set
to the operating voltage printed next to these markers and can be set to another
voltage by turning the fuse holder by 180°.
◊
Please note that when operating the unit at 120 V, a higher fuse rating
is required. Please refer to the “Specifications” for details.
is required. Please refer to the “Specifications” for details.
◊
If you set the unit to a different mains voltage, be sure to use a fuse
of the correct type and rating. Please refer to the “Specifications”
for details.
of the correct type and rating. Please refer to the “Specifications”
for details.
◊
Blown fuses must be replaced by fuses of the same type and rating!
Please refer to the “Specifications” for details.
Please refer to the “Specifications” for details.
!
!
Caution!
◊
Before changing the fuse, switch off the device and pull the plug to
avoid electric shock or damage to the device.
avoid electric shock or damage to the device.
The DDM4000 power connection is made by using the enclosed cable and
the amplifier’s standard IEC receptacle. It meets all of the international safety
certification requirements.
◊
Please make sure that all units have a proper earth connection. For your
own safety, never remove or disable the earth conductor from the unit
or of the AC power cord.
own safety, never remove or disable the earth conductor from the unit
or of the AC power cord.
IMPORTANT NOTES CONCERNING INSTALLATION
◊
The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after your purchase
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in
the original equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please contact the
distributor nearest you. A list of distributors can be found in the support area of
our website (http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!
!
!
Caution!
◊
Extreme output volumes may damage your hearing and/or
your loudspeakers. Turn down all volume and level controls before
you switch on the unit. Always set the volume to an appropriate level.
your loudspeakers. Turn down all volume and level controls before
you switch on the unit. Always set the volume to an appropriate level.