Behringer Digital Pro Mixer DDM4000 Benutzerhandbuch

DIGITAL PRO MIXER DDM4000 User Manual

4.1.6  BPM-synchronized effect parameters
Some of the effect sound especially interesting when time-related parameters 

respond to the rhythm of the music. The DDM4000 supports editable, 

BPM-synchronized parameters.

Editing BPM-synchronized parameters:
1)  Make sure that the BPM Counter calculates the correct value 

(if applicable, enter manually with TAP, see Chapter 4.2).

2)  Change the parameter step-by-step with the BEAT push buttons  

(49)

. 

The selected value appears on the display.

DELAY, ECHO:
For the delay and echo effect, you can edit the delay time in musical units. 

The number of beats is displayed:

Fig. 4.3: Beats and note values for delay and echo

A rhythmical representation of the whole looks like this 

(showing a selection of several beats):

Fig. 4.4: Rhythmically represented delay parameter

FLANGER, PHASER, PAN, FILTER:
For the filter effect, the BPM synchronization is only possible in LFO Mode. 

You can adjust the speed of the modulation (LFO speed). The values 1–32 

correspond to the number of beats that are needed for one oscillation period:

Fig. 4.5: Beats and note values for modulation effects

The following picture results from the musical context:

Fig. 4.6: LFO parameter, represented in beats and bars

4.1.7  FX setup
FX Setup lets you specify the crossover frequencies between the individual bands 

of the EFFECT/BAND push buttons  

(46) 

 –  

(48) 

 (Kill function on the effect path, 

see Chapter 4.1.2). This is individually done for both effect devices.

FX 1 LOW / FX 2 LOW: 

Crossover frequency between LOW and MID.

FX 1 HIGH / FX 2 HIGH:  Crossover frequency between MID and HIGH.

1)  Press the left or right PARAMETER knob  

(45) 

 to select the parameter for 

FX 1 and FX 2.

2)  Turn the left or right PARAMETER knob to change the value of 

the selected value.

The Auto BPM Counter is automatically able to convert the tempo of the track 

being played into BPM (Beats Per Minute). The detected BPM values are the 

basis for all time-related effect parameters and for the recording duration 

of the sampler. The BPM can be detected in two different ways: manually 

and automatically. In both cases, the current BPM is shown in Section B of 

the display.