Bosch Appliances Video Game Controller D9412GV2 Benutzerhandbuch
D9412GV2/D7412GV2 | Program Entry Guide | 2.0 GV2MAIN
EN | 28
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
2.5 Power
Supervision
Table 21: Event Descriptions, Priorities, and
Numbers, continued
AC Fail Time
Default:
1
Event
Priorit
y
Priorit
y
Event Description
Event
Number
Number
Selection: 1 to 90 (Blank and 0 are invalid)
Program the amount of time that AC power must be
off before the control panel responds to the AC
failure. The response to restoral of AC power is
delayed for the same amount of time. The control
panel always monitors AC. The response to this
prompt is the actuation of the relay programmed in
the Panel-Wide Relays prompt AC Failure (refer to
Section
off before the control panel responds to the AC
failure. The response to restoral of AC power is
delayed for the same amount of time. The control
panel always monitors AC. The response to this
prompt is the actuation of the relay programmed in
the Panel-Wide Relays prompt AC Failure (refer to
Section
Parameters Changed
008
054
RPS Access OK
008
064
RPS Access Fail
008
065
Remote Reset
008
079
Program Access OK
n/a
n/a
Program Access Fail
n/a
n/a
Service Start
008
029
the AC Fail report enabled by the AC Fail/Res Rpt
prompt. Local annunciation of an AC failuter is
controlled by the AC Fail Display prompt.
prompt. Local annunciation of an AC failuter is
controlled by the AC Fail Display prompt.
Service End
008
030
Fire Walk Start
008
036
Fire Walk End
008
037
Walk Test Start
008
038
Walk Test End
008
039
UL 864 requirements, Section 50.2.1.b
Extra Point
008
023
states: “A trouble signal shall be
Send Point Text
n/a
n/a
transmitted for remote station, central
RF Low Battery
006
093
station, and proprietary-type protected
RF Battery Restore
006
094
premises units after a delay of between
Date Changed
008
059
60 and 180 min.
Time Changed
008
060
Exception: Products are not prohibited
Delete User
008
090
from providing capability of selecting
User Code Change
008
056
that the primary power failure trouble
Area Watch
008
042
signal transmission be delayed other
Card Assigned
008
110
time periods, including no
Change Level
007
061
delay,provided the 60 – 180 min delay
Access Granted
008
003
is also included.”
No Entry
008
115
To meet UL 864 requirements, program
Door Left Open
008
116
AC Fail Time with 61, 63, 65, ... (odd
Cycle Door
008
112
numbered values), and 89. Always
Door Unlocked
008
113
check with the Authority Having
Door Secure
008
114
Jurisdiction for local requirements.
Door Request
008
117
Door Locked
008
145
When you program AC Fail Time, if the second digit
is:
is:
User Alarm COMMAND 7
002
005
User Alarm COMMAND 9
002
006
•
•
1, 3, 5, 7, or 9 (such as 3, 5, 11, 13, 15, 21, and
so on): The AC Fail Time interval is in minutes.
so on): The AC Fail Time interval is in minutes.
2, 4, 6, 8, or 0 (such as 2, 4, 6, 10, 12, 20, 22,
and so on): The AC Fail Time interval is in
seconds.
and so on): The AC Fail Time interval is in
seconds.
For the following items to be true, AC
Fail/Res Rpt must be programmed as
Yes and AC Tag Along must be
Fail/Res Rpt must be programmed as
Yes and AC Tag Along must be
programmed as No.