Binatone TT136 Merkblatt

Safety Precautions
Do not install Arkon products over an air bag cover or within the air 
bag deployment zone.  Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or      
air bag deployment. 

Arkon is not responsible for any damages caused to your car, your 
device, or yourself due to the installation or use of this pedestal mount.

Consumer Hotline:
USA     (800) 841-0884
INT’L    (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

Arcadia, CA 91006 USA

Designed in USA | Made in China and Taiwan

© Copyright 2008 Arkon Resources, Inc.

Connect the dual T-slots (E) on the back of the adapter plate 
to the dual T-tabs (F) on the dash pedestal head.

Connect the dual T-slots (E) on the back of the adapter plate 
to the dual T-tabs (F) on the dash pedestal head.

Step 1.

Step 1.

Step 1.

While holding the adapter plate, gently insert the device 
(not included, sold separately) into the adapter plate until 
an audible click is heard.

Connect the dual T-slots (E) on the back of the adapter plate 
to the dual T-tabs (F) on the dash pedestal head.

To remove the dash mount completely, use a cotton swab 
dipped in isopropyl alcohol.  Simply peel up a corner of the 
dash mount adhesive and swab under the pad while gently 
pulling until the adhesive begins to release.  Remove slowly.  
No damage will occur from the adhesive if it has been properly 
installed and removed per these instructions.  You may see a 
slight discoloration between this area and other parts of your 
dash due to fading caused by the sun.

Step 1.

Step 1.