Wolf AGE36 Merkblatt
NOTE: In line with its policy to continually improve its product, Wolf Range Company
reserves the right to change materials and specifications without notice.
This appliance is manufactured for commercial use only and is not intended for home use.
F-
36977 (02-08)
MODEL: AGE SERIES
LOW PROFILE HEAVY-DUTY
GAS GRIDDLE
INSTALLATION REQUIREMENTS:
1. A gas pressure regulator supplied with the unit must be
1. A gas pressure regulator supplied with the unit must be
installed:
Natural Gas 5.0" (127 mm) W.C.
Propane Gas 10.0" (254 mm) W.C.
2. All models require a 6" (152 mm) clearance at both sides
and rear adjacent to combustible and non-combustible
construction.
construction.
3. These units are manufactured for installation in accordance
with ANSI/NFPA-70, National Electrical code.
An adequate ventilation system is required for Commercial
Cooking Equipment (NFPA No. 96). Information may be
OVERALL
WORKING
NO. OF
TOTAL
NO. OF
APPROX.
MODEL
WIDTH
DEPTH
HEIGHT*
HEIGHT*
BURNERS
BTU/HR.
DRAWERS**
SHP.WT.
AGE24
24"
33"
15½"
11³⁄₈"
2
60,000
1
285 lbs./129 kg
AGE36
36"
33"
15½"
11³⁄₈"
3
90,000
1
400 lbs./181 kg
AGE48
48"
33"
15½"
11³⁄₈"
4
120,000
1
480 lbs./218 kg
AGE60
60"
33"
15½"
11³⁄₈"
5
150,000
2
650 lbs./295 kg
AGE72
72"
33"
15½"
11³⁄₈"
6
180,000
2
790 lbs./358 kg
*These are nominal dimensions and can vary by +1.75" with adjustable legs.
**All Rear Grease option griddles have only one (1) grease drawer on the left side.
**All Rear Grease option griddles have only one (1) grease drawer on the left side.
obtained by writing to the National Fire Protection Association,
Batterymarch Park, Quincy, MA 02169.
Batterymarch Park, Quincy, MA 02169.
4. These units are manufactured for installation in accordance
with National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (lat-
est edition). Copies may be obtained from The American
Gas Association, Accredited Standards Committee Z223
@ 400N. Capital St. NW, Washington, DC 20001, or the
Secretary Standards Council, NFPA, 1 Batterymarch Park,
Quincy, MA 02169-7471.
est edition). Copies may be obtained from The American
Gas Association, Accredited Standards Committee Z223
@ 400N. Capital St. NW, Washington, DC 20001, or the
Secretary Standards Council, NFPA, 1 Batterymarch Park,
Quincy, MA 02169-7471.
NOTE: In the Commonwealth of Massachusetts
All gas appliances vented through a ventilation hood or
exhaust system equipped with a damper or with a power
means of exhaust shall comply with 248 CMR.
exhaust system equipped with a damper or with a power
means of exhaust shall comply with 248 CMR.
5. This appliance is manufactured for commercial installation
only and is not intended for home use.