Windsor 10080480 Benutzerhandbuch

86302100 CLIPPER DUO 10/02/07 

 

Check machine for cord damage 

Check recovery dome and gasket for damage and 
cleanliness 

Check brushes – should be clean with no lint or 
strings attached 

Inspect vac shoe for blockage; remove fibers with 
coat hanger, etc. 

Check hoses for wear, blockages, or damage 

Check handles, switches, and knobs for damage 

Run one gallon of water through solution system 

Clean out recovery tank, clean float screen and 
check float valve to make sure it moves freely 

Clean out solution  

Clean outside of all tanks and check for damage 

Run vac motor for at least one minute to allow motor 
to dry 

Store with dome off tank to allow the tank to dry 

Check all bearings for noise 

Check all gaskets for wear and leakage 

Check pump pressure; observe spray pattern and 
check with gauge if necessary 

Check and clean solution screen 

Check brush for wear; ensure bristles are not 
damaged 

Check condition of vac shoe and frame for damage 

Check overall performance of machine 

Check vac motor carbon brushes 

Check belts for wear and replace as necessary 

Check cables for fraying