High End Systems High End LCD Controller for Studio Color Benutzerhandbuch
Studio Color LCD Controller
Selecting MSC or LSC
5-9
5
3.
Press the Cursor
<Down>
arrow key to display the menu
options shown below:
4.
Use the Cursor
<Right>
and
<Left>
arrow keys to select
;
)
, as shown below:
5.
Press the Construct
<Up>
and
<Down>
arrow keys to change
the selection between
77;D
)9/
or
;
$2$
(0*
D
)
.
6.
Use the Cursor
<Left>
arrow key to select
7
and
continue with the next section.
Setting the Device ID
The device ID is used by MSC and LSC to identify master
controllers.
controllers.
•
In LSC, ID 0 (zero) means that the device responds to
any ID. For example, if you were to send out commands
to device ID 7 or ID 14 or ID 112, the controller with
device ID 0 would respond. Device ID 0 is the default
setting.
any ID. For example, if you were to send out commands
to device ID 7 or ID 14 or ID 112, the controller with
device ID 0 would respond. Device ID 0 is the default
setting.
•
MSC uses device ID 127 instead of ID 0 to tell a device
to respond to any ID.
to respond to any ID.
E7 G7 G)
)
3 ,
7A 5
G G) ;7 0-/:
3 ,
; $2$
(0*
D
)