High End Systems High End LCD Controller for Studio Color Benutzerhandbuch
Studio Color LCD Controller
Locking/Unlocking a Fixture
5-13
5
Locking/Unlocking a Fixture
This feature temporarily removes a fixture from all pages.
This might be necessary in the event of a fixture malfunction
or if you want to remove a fixture for a special event or
effect. Removing a fixture in this manner requires no
reprogramming because no memory is actually changed.
This might be necessary in the event of a fixture malfunction
or if you want to remove a fixture for a special event or
effect. Removing a fixture in this manner requires no
reprogramming because no memory is actually changed.
Use the same procedure to return the fixture to normal
operation. Locked fixtures are unlocked at controller power-
up as well.
operation. Locked fixtures are unlocked at controller power-
up as well.
1.
Press and hold for 15 seconds the Address key of the fixture
that you want to lock out. The LCD display shows the
current parameter settings for that fixture, similar to the one
shown below:
that you want to lock out. The LCD display shows the
current parameter settings for that fixture, similar to the one
shown below:
2.
After 15 seconds the bottom line in the LCD display appears
as shown below:
as shown below:
) 9 ?)0+ 0$;-C()-
*
88+ 5 588B;5+55+
) 9 ?)0+ 0$;-C()-
*
' )