High End Systems High End LCD Controller for Studio Color Benutzerhandbuch
Studio Color LCD Controller
Specifications
1-5
1
Cables and Connectors
•
DMX data cables: Belden
®
9841 or equivalent (meets
specifications for EIA RS-485 applications) with
characteristics listed below:
characteristics listed below:
•
2-conductor twisted pair plus a shield
•
maximum capacitance between conductors - 30 pF/
ft.
ft.
•
maximum capacitance between conductor and shield
- 55 pF/ft.
- 55 pF/ft.
•
maximum resistance of 20 W/1000 ft.
•
nominal impedance 100–140 W
•
22–24 AWG with insulation having a dielectric
rating of 300 volts or higher
rating of 300 volts or higher
•
DMX data connectors: Standard 3-pin male and female
XLR connectors
XLR connectors
•
DMX data terminators: Male XLR connector with 120
ohm terminator (see Chapter 2)
ohm terminator (see Chapter 2)
•
All other cables (listed below): 2-conductor shielded
cable
cable
•
Master/Slave cable
•
Remote Enable cable
•
Stereo Audio Input cable
•
Remote enable connector: 3.5 mm (1/8 in) tip/ring
connector as shown in Figure 6-6 on page 6-30.
connector as shown in Figure 6-6 on page 6-30.
•
Connectors listed below: 6mm (1/4 in) tip/ring/sleeve
connector
connector
•
Master/Slave connector
•
Stereo Audio Input connector
•
Cables for backing up or restoring memory using a
personal computer: see Chapter 7
personal computer: see Chapter 7