High End Systems High End LCD Controller for Studio Color Benutzerhandbuch

2-26

Powering On the Controller

Studio Color LCD Controller

Before continuing, make sure you have done all of the 
following:

1.

Selected the controller’s voltage and frequency as described 
in the section titled “Setting the Controller Voltage” on page 
1-7.  

2.

Installed the correct fuse as described in the section titled 
“Replacing the Fuse” on page 1-9.

3.

Configured the controller’s switches as described in the 
section titled “Setting the Switches” on page 2-4.

4.

Configured and connected the fixtures as described in the 
section titled “Connecting Fixtures” on page 2-9.  (Also see 
the Studio Color User Manual for additional details, such as 
mounting, not covered here.)

5.

Connected cabling to the controller as described in the 
sections titled “Cables and Terminators” on page 2-14 and 
“Master and Slave Controllers” on page 2-20 and “MIDI In 
and Out Ports” on page 2-22 and “Other Connectors” on page 
2-23.

6.

Optional.  Rack mounted the controller as described in the 
section titled “Rack Mounting the Controller” on page 2-25.

1.

Connect all fixtures to suitable power outlets.  Consult the 
documentation provided with the fixtures for details.

2.

Power ON all fixtures connected to the Studio Color LCD 
controller.  To turn on fixture power, press the “

I

” side of the 

fixture’s power switch.