High End Systems High End LCD Controller for Studio Color Benutzerhandbuch

Studio Color LCD Controller

Creating a Program

4-11

4

Press the 

<Select>

 key to begin programming.  The Select 

LED flashes and the LCD display appears as shown below:

Press the Address keys corresponding to all fixture numbers 
you wish to program.  You can do the following:

•

Press one Address key to program a single fixture.

•

Press and hold two Address keys at the same time to 
select a range of fixtures.  For example, holding down 
Address keys 

<1>

 and 

<4>

 at the same time selects fixture 

numbers 1 through 4.

•

Press multiple Address keys, one at a time, to select 
multiple fixtures.  For example, pressing the 

<2>

, 

<7>

 and 

<5>

 keys to program fixture numbers 2, 7 and 5 (the order 

is not important).

Selecting multiple fixture numbers means all fixtures 
will share the same constructs and values.  However, 
random (unsynchronized) constructs will still play 
back randomly.  See the section titled “Programming 
Hints” on page 3-2 for more information.

Press one of the Construct keys to edit that construct.  By 
default, with no constructs programmed, the gate (shutter) is 
closed so no light is emitted.  Opening the shutter without 
changing any other constructs projects a white beam at 
maximum brightness.  As you edit constructs, you will see 
first-hand what your page looks like.

For detailed descriptions of all constructs, see the section 
titled “Using the Construct Keys” on page 3-8.

;)  ('      *  3- <

;0: '