Perle Systems Iolan Sds4 Hl Device Server 4030370 Benutzerhandbuch
368
Configuring HTTP Tunnels
On IOLAN 2, under serial port configuration, select serial port and configure for Console
Management profile..
Management profile..
The setup for HTTP Tunnel serial-to-serial is now complete
.
Serial-to Host
The following example will demonstrate how to setup a serial device (Point of Sale terminal) to an IP
host (100.10.60.3) connection via an HTTP tunnel. Because IOLAN 1 is behind the firewall, it will
need to initiate the tunnel connection to IOLAN 2. At the application level, the serial device will
initiate the connection with the IP host.
For more HTTP tunneling configuration parameters see
host (100.10.60.3) connection via an HTTP tunnel. Because IOLAN 1 is behind the firewall, it will
need to initiate the tunnel connection to IOLAN 2. At the application level, the serial device will
initiate the connection with the IP host.
For more HTTP tunneling configuration parameters see
Protocol - Telnet
TCP port number
must match TCP
port number on
IOLAN 1
must match TCP
port number on
IOLAN 1
10.10.50.2
100.10.50.1
IOLAN 1
IOLAN 2
HTTP Tunnel Data
10.10.60.3
Point of Sale
System/Device
TCP Sockets
TCP Sockets
Serial Device