Trane CAH-SVX01A-EN Benutzerhandbuch
Installation
42
CAH-SVX01A-EN
Figure 44. Junction box mounting and wiring details
Figure 45. Typical quick connects with wiring identification
Valve jack wiring:
.Black connector is for 24 Vac power supply (black wire for GND and red
wire for 24 Vac)
.White connector is for 0 to 10 Vac analog signal (black wire for GND and
red wire for 0 to 10 Vac.
.Black connector is for 24 Vac power supply (black wire for GND and red
wire for 24 Vac)
.White connector is for 0 to 10 Vac analog signal (black wire for GND and
red wire for 0 to 10 Vac.
Power 24 Vac
Sig. 0–10 Vdc
Signal to Slave
Actuator
Actuator
Actuator
Wire from
ribbon cable
ribbon cable
External Insulating
Requirements
Requirements
The following areas should be
specifically addressed, as applicable:
specifically addressed, as applicable:
•
Supply and return water piping
connections
connections
•
Supply and return refrigerant
piping connections
piping connections
•
Condensate drain lines and
connections
connections
•
Outdoor-air-intake duct
connections
connections
•
Discharge duct connections
•
Special requirements for low-
temperature-air systems
temperature-air systems